Ruijie RG-AP630 (IDA2) Dış Ortam Access Point

  • Dual Band,
  • Int. Directional Ant. Ext. Antenna support,
  • 2 GE RJ45 + 1 SFP Ports,
  • IP67,
  • Dış Ortam / OutDoor,
  • WiFi 5

Ruijie RG-AP630 (IDA2) Dış Ortam Access Point

Ruijie RG-AP630 (IDA2), yeni nesil yüksek hızlı kablosuz ağ uygulamaları için Ruijie’nin birinci sınıf 802.11ac Wave 2 kablosuz erişim noktalarıdır.
RG-AP630(IDA2), 2.533Gbps erişim hızını destekler. RG-AP630(IDA2) güvenlik, RF kontrolü, mobil erişim, QoS, kesintisiz dolaşım ve diğer Wi-Fi yönleriyle tam olarak ilgilenir. Ruijie RG-WS Kablosuz Denetleyici Serisi ile bir araya gelen AP’ler, Wi-Fi kullanıcı verilerini iletme, gelişmiş güvenlik ve kolaylıkla erişim kontrolü sunar.
Endüstriyel sınıf AP muhafazası (IP67 sınıfı), aşırı dış ortam koşullarına dayanabilir ve bu nedenle cihaz kurulumunu ve bakımını basitleştirir. RG-AP630(IDA2), yönlü anten ile yerleşiktir. Çeşitli dağıtım zorluklarının üstesinden gelmek için kapsamlı bir harici anten koleksiyonu da mevcuttur. AP, harici ve dahili antenler arasında otomatik geçişi destekler.

Öne Çıkan Özellikleri

  • 802.11ac/802.11ac wave2 Üstün Kablosuz Performansı
  • Dahili Akıllı Anten (opsiyonel Harici Anten) ve Yıldırım Koruyucu
  • Olağanüstü Çevre Uyumluluğu (IP67, -40-55°C)

Teknik Özellikleri

Model RG-AP630(IDA2)
Target Deployments For big campus, wireless city, harbour, storage room, mine
Basic Specifications Radio Concurrent dual-radio dual-band
Protocol 802.11a/b/g/n/ac Wave2
Operating Bands 802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz
(vary depending on countries)
Antenna            Built-in Directional Smart Antenna (support external/internal antenna switching)
Antenna Loba Orientation Internal Directional: Horizontal 60 degrees,Vertical 30 degrees
Antenna Gain 10dBi
Max Throughput Build-in antenna model: 800Mbps@2.4G
1733Mbps@5G
2.533Gbps per AP;
External antenna model:
600Mbps@2.4G
1300Mbps@5G
1.9Gbps per AP
Spatial Streams 4
Modulation OFDM: BPSK@6/9Mbps
QPSK@12/18Mbps
16-QAM@24Mbps
64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps
DQPSK@2Mbps
CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
Receiver Sensitivity 11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps)
11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), – 77dBm(54Mbps)
11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15
11ac HT20: -90dBm (MCS0) , -63dBm (MCS9)
11ac HT40: -85dBm(MCS0) , -60dBm (MCS9)
11ac HT80: -82dBm(MCS0) , -58dBm (MCS9)
Maximum Transmit Power 27dBm
Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations.
Adjustable Power 1dBm
IP Rating IP67
Ports Service Port One 10/100/1000Base-T Port(ETH1/PoE IN);One 10/100/1000Base-T Port(ETH2);One 1000M SFP Port(Combo Port)
Management Port 1 Console Port(RJ45)
Power Power Supply PoE+ (802.3at)
Power Consumption <25W
WLAN Maximum clients per AP Up to 512
SSID capacity Up to 16 per radio
Up to 32 per AP
SSID hiding Support
Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID Support
Remote Intelligent Perception Technology (RIPT) Support
X-speed Support
Intelligent  load balancing based on the number of users or traffic Support
STA control SSID/radio-based
Bandwidth control STA/SSID/AP-based speed control
Preference for 5GHz (band select) Support
Wireless position tracking Support
Dynamic Frequency Selection(DFS) Future Release Support
Security PSK, Web, and 802.1x authentication Support
Data encryption WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)
QR code authentication Support
SMS authentication Support
PEAP authentication Support
Data frame filtering Whitelist, static/dynamic blacklist
User isolation Support
Rogue AP detection and countermeasure Support
Dynamic ACL assignment Support
WAPI Support
RADIUS Support
CPU Protection Policy (CPP) Support
Network Foundation Protection Policy (NFPP) Support
Wireless Intrusion Detection System(WIDS) Support
Wireless Intrusion Prevention System (WIPS) Support
Routing IPv4 address Static IP address or DHCP reservation
IPv6 CAPWAP tunnel Support
ICMPv6 Support
IPv6 address Manual or automatic configuration
Multicast Support
Management and Maintenance Network management SNMP v1/v2C/v3, Telnet, SSH, TFTP, and web management
Visualized wireless heat map analysis Support
(need to integrate with SNC)
Real-time spectrum analysis Support
(need to integrate with SNC)
Fault detection and alarm Support
Cloud AC management Support
Statistics and logs Support
FAT/FIT switching The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.
External Characteristics Lock Support
LED Indicators Power status and WDS signal strength
Relevant Standard Wi-Fi Alliance Certification Support
Safety Standard GB4943, , EN/IEC 60950-1, EN/IEC 60950-22
EMC Standard GB9254-2008, EN301 489, EN55022
Health Standard EN 50385,
Radio Standard FCC Part15,EN300328, EN301893
Vibration Standard GB/T 2423
Specifications Dimensions (W x D x H) (mm) 276 × 246 × 90
Weight <2.5kg
Work Environment Temperature Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C)
Storage Temperature: -40°C to 85°C
Humidity Operating Humidity: 0% to 100% (non-condensing)
Storage Humidity: 0% to 100% (non-condensing)
Installation Mode Wall/pole-mount installation

Dış Ortam Antenler

Model

RG-ANTx3-2400D

RG-ANTx3-5800D

RG-ANTx3-2400&5800(O)

Type of External Antenna

Directional

Directional

Omnidirectional

Electrical Specifications

Frequency range

2.4 to 2.483 GHz

5.125 to 6.100 GHz

2.4 to 2.5 GHz; 5.125 to 6.100 GHz

Gain

3 × 15 dBi

2 × 19 dBi (vertical) + 16 dBi (dual inclined planes)

8 dBi

Horizontal beamwidth

65°

21°

360°

Vertical beamwidth

16°

16°

17°

Front-to-back ratio

≤ -25 dB

≤ -25 dB

≤ -25 dB

VSWR

≤ 1.5

≤ 1.5

≤ 1.5

Polarization

2*VP(vertical polarization)+1*HP(horizontal polarization)

±45° and vertical polarization

VP(vertical polarization)

Input impedance

50 ohms

50 ohms

50 ohms

Mechanical Specifications

Mounting mode

Pole mounting
(pole diameter 30 to 50 mm)

Pole mounting
(pole diameter 50 to 120 mm)

Pole mounting
(pole diameter 40 to 70 mm)

Temperature range

-40°C to +60°C

-40°C to +60°C

-40°C to +60°C

Unit weight

2.3 kg

1.3 kg

1.2 kg

Dimensions

400 × 240 × 35 mm (L × W × H)

380 × 380 × 33 mm (L × W × H)

Φ145 × 330 mm

Connector

3 × N-K

3 × N-K

6 × N-K

 

Dökümantasyon

Veri Sayfası
Donanım Kurulum Kılavuzu
RGOS Yapılandırma Kılavuzu
RGOS Komut Referansı